Next: List of Figures Up: Guide 6 Postprocessing and Graphics Prev: Preface

Contents

• Preface
• List of Figures
• Part I: Numerical processing
  • 2.1 Introduction
  • 1 Mesh manipulation
    • 1.1 Geometric transformations
    • 1.2 Changing the finite element type
    • 1.3 Changing the mesh structure
    • 1.4 Inquiries and verification
      • 1.4.1 Inquiries
      • 1.4.2 Verification
  • 2 Manipulation of solutions
    • 2.1 Manual construction of a D.S. B
    • 2.2 Symmetrization and "gluing together" of a D.S. B
      • 2.2.1 Symmetrization
      • 2.2.2 Gluing together
    • 2.3 Manipulation of a D.S. B resulting from a transient problem
    • 2.4 Changing the type of a D.S. B
    • 2.5 Computation of interface and reaction forces
    • 2.6 Computing the stresses (D.S. TAE)
    • 2.7 Computing the flux and temperature (D.S. TAE)
    • 2.8 Inquiring about D.S.
    • 2.9 Extrema of a D.S. B
    • 2.10 Norm and residues
      • 2.10.1 Norm corresponding to D.S. B
      • 2.10.2 Norm corresponding to D.S. TAE
      • 2.10.3 Energy norm corresponding to D.S. B
      • 2.10.4 Solution error for D.S. B
  • 3 Manipulation of structures and miscellaneous
    • 3.1 Structure COOR of nodes
    • 3.2 Changing the type of a D.S. TAE
    • 3.3 Formatting, de-formatting of an arbitrary D.S.
    • 3.4 Creating a D.S. NOPO
    • 3.5 Changing the type of a D.S. MUA
    • 3.6 Changing the type of a D.S. AMAT
    • 3.7 Eigenvalues and eigenvectors of a D.S. VVPR
    • 3.8 Miscellaneous
• Part II: Graphics
  • Quick guide
  • 1 General structure
  • 2 Visualization of meshes
    • 3.1 Introduction
    • 2.2 Two-dimensional meshes TRNOXX
      • 2.2.1 Aim and utilization limits
      • 2.2.2 Utilization of TRNOXX (2D)
      • 2.2.3 Complete description of TRNOXX (2D)
    • 2.3 Three-dimensional meshes TRNOXX
      • 2.3.1 Aims and utilization limitations
      • 2.3.2 Utilization of TRNOXX (3D)
      • 2.3.3 Complete description of TRNOXX (3D)
    • 2.4 Three-dimensional meshes REFEXX
      • 2.4.1 Aim and utilization limits
      • 2.4.2 Utilization of REFEXX
      • 2.4.3 Complete description of REFEXX
      • 2.4.4 Keyword-Action correspondence
      • 2.4.5 Plot descriptions
  • 3 Visualization of solutions
    • 4.1 Introduction
    • 3.2 Two-dimensional solutions TRMCXX
      • 3.2.1 Aim and utilization limits
      • 3.2.2 Utilization of TRMCXX
      • 3.2.3 Complete description of TRMCXX
      • 3.2.4 P1 interpolation of solutions
    • 3.3 Two-dimensional stresses TRSTXX
      • 3.3.1 Aim and utilization limits
      • 3.3.2 Utilization of TRSTXX
      • 3.3.3 Complete description of TRSTXX
    • 3.4 Three-dimensional solutions TRC3XX
      • 3.4.1 Aim and utilization limits
      • 3.4.2 Utilization of TRC3XX
      • 3.4.3 Complete description of TRC3XX
      • 3.4.4 P1 interpolation of the solutions
  • 4 Visualization of curves
    • 5.1 Introduction
    • 4.2 Utilization of TRACXX
    • 4.3 Complete description of TRACXX
  • 5 Visualization of surfaces
    • 1.1 Introduction
    • 5.2 Aim and utilization limits
    • 5.3 Utilization of VIS3XX
    • 5.4 Complete description of the module
      • 5.4.1 The different input data possible
      • 5.4.2 Main commands
      • 5.4.3 General display characteristics
      • 5.4.4 Axes
  • 6 Diverse visualizations
    • 6.1 Introduction and quick guide
    • 6.2 Utilization
    • 6.3 Matrix profiles TRPRXX
    • 6.4 Characteristic points and lines TRPOXX
    • 6.5 Diverse
      • 6.5.1 Isovalues on a cut through a 3D mesh
      • 6.5.2 Piezometry
      • 6.5.3 Eigenvalues and eigenvectors
  • 7 Implementation notes
    • 7.1 Trees
    • 7.2 Commons
    • 7.3 Diverse
• Part III: Fortran 3D
  • 1 General introduction
    • Introduction
    • 1.2 Description of objects
    • 1.3 Visualization of objects
    • 1.4 Displaying the image and managing the screen
    • 1.5 Input management
  • 2 General tools
    • 2.1 Defining the output terminal
    • 2.2 Screen management
    • 2.3 Association of names with elementary components
    • 2.4 Writing directly on the visualization surface
  • 3 Creating a 2D image
    • 3.1 Masks and windows
    • 3.2 Graphics instructions: 2D
  • 4 Creating a 3D image
    • 4.1 General program structure
    • 4.2 Masks and windows
    • 4.3 3D transformations
    • 4.4 The transformations
    • 4.5 3D graphics instructions
    • 4.6 Texts
  • 5 Graphics
    • 5.1 Color
    • 5.2 Stereoscopy
  • 6 Input management
    • 6.1 Definition of the terminal and input surface
    • 6.2 Interaction subroutines
    • 6.3 Entering a position in the 3D space
  • 7 Internal programs
    • 7.1 Interrogation subroutines
    • 7.2 Position and clipping
    • 7.3 Particular displays
    • 7.4 Basic manipulations
    • 7.5 Conversions
    • 7.6 Matrix and vector manipulations
    • 7.7 Sorting and dichotomy
    • 7.8 Implementation aids
    • 7.9 Unclassed
  • 8 Adapting a new terminal
    • 8.1 Adapting a new input terminal
    • 8.2 Adapting a new output terminal
    • 8.3 List of devices available
  • 9 Examples
    • 9.1 Creating 2D geometric figures
    • 9.2 Creating 3D geometric figures
• References